3310 E. 59th Street
Long Beach, CA 90805
Phone: (562) 634-2823  Fax (562) 634-8449

Aluminum Door Frames - Aluminum Doors - Sliders - Pocket Frames - Glazing Components


  General Construction  
 Pre-finished Knock-Down Aluminum Door Frame Consisting of Separate Strike and/or Hinge Jamb and a Header Manufactured by Western Integrated Materials, Inc.

1. Extruded from 6063 T5 aluminum with a minimum wall thickness of .062

2. To be supplied with anodized surface of Clear satin, Bronze Anodize, Black Anodize or a specific baked enamel.

3. Manufactured to receive 4-1/2" x 4-1/2"  .134 gauge square hinges.

4. Supplied with pre-finished mitered snap-on aluminum casing.

5. Supplied with 1/8" thick aluminum strike and hinge back up, pre-mounted on jambs.

6. Supplied with notch at top of jamb and corner brackets to provide a correct alignments with the header and add to the strength and dimensional stability of the joint.

7. Manufactured to receive a standard 2-3/4" Cylindrical , 3-1/4" Corbin or 4-7/8" A.S.A. strike.

8. Supplied also with vinyl or mohair mute.

9. Frame to be available for 1-3/4" door thickness.

Back Set = 1/4" on the door 7/16" on the frame.

Please Note:
Additional field labor and or cutting may be required during installation of Western Integrated aluminum door frames. i.e. cutting scribe, notching frames for clips, (mullions, muntins) notching trim for clips, ect. Please call production for any additional information.

Copyright - All Rights Reserved.
Western Integrated Materials, Inc.